Rates of landscape evolution over the past million years are difficult to quantify. This study develops a technique which is able to measure changes in rock cooling rates (related to landscape evolution) over this timescale. The technique is based on the electron spin resonance dating of quartz minerals. Measurement protocols and new numerical models are proposed that describe these data, allowing for their translation into rock cooling rates.

The current geochronological state of the art for applying the radiocarbon (¹⁴C) method to deep-sea sediment archives lacks key information on sediment bioturbation, which could affect palaeoclimate interpretations made from deep-sea sediment. We use a computer model that simulates the ¹⁴C activity and bioturbation history of millions of single foraminifera at the sea floor, allowing us to evaluate the current state of the art at the most fundamental level.

Here we review current progress in LA-ICP-MS U–Pb carbonate geochronology and present strategies for acquisition and interpretation of carbonate U–Pb dates. We cover topics from imaging techniques and U and Pb incorporation into calcite to potential limitations of the method – disequilibrium and isotope mobility. We demonstrate the incorporation of imaging and compositional data to help refine and interpret U–Pb dates. We expect this paper to become a go-to reference paper for years to come.

Recent technological advances allow researchers to obtain radiocarbon ages from smaller samples than previously possible. We investigate the reliability and precision of radiocarbon ages obtained from miniature (11–150 μg C) samples of terrestrial plant fragments taken from sediment cores from Lake Żabińskie, Poland. We further investigate how sampling density (the number of ages per 1000 years) and sample mass (which is related to age precision) influence the performance of age–depth models.

In this study we present a new marine chronology of the last ~30 000 years for a sediment core retrieved from the central Arctic Ocean. Our new chronology reveals substantially faster sedimentation rates during the end of the last glacial cycle, the Last Glacial Maximum, and deglaciation than previously reported, thus implying a substantial re-interpretation of paleoceanographic reconstructions from this sector of the Arctic Ocean.

Nikon–TRACKFlow is a new system with dedicated modules for automated microscope control and imaging for fission track laboratories. It is based on the Nikon Eclipse Ni-E motorised upright microscope and embedded within Nikon NIS-Elements software. The system decouples image acquisition from analysis based on a number of automated user-friendly designs and protocols. Nikon–TRACKFlow aims to grow towards a high-throughput imaging system for Earth Sciences and other material-oriented sciences.

Optically stimulated luminescence dates the last exposure of quartz and feldspar minerals to sunlight. We investigated its sub-methods (TT-OSL, VSL, and pIRIR) to date middle and early Pleistocene sediments. Inspection of natural signals of samples can reveal saturated samples that produce only minimum ages. Using these sub-methods, minimum ages of up to the early Pleistocene can be obtained for eastern Mediterranean aeolian sediments of Nilotic origin.

The U–Pb method is one of the most powerful and versatile methods in the geochronological toolbox. With two isotopes of uranium decaying to two different isotopes of lead, the U–Pb method offers an internal quality control that is absent from most other geochronological techniques. U-bearing minerals often contain significant amounts of Th, which decays to a third Pb isotope. This paper presents an algorithm to jointly process all three chronometers at once.

Our study presents the first seasonally laminated (varved) sediment record covering almost the entire Holocene in high mountainous arid Central Asia. The established floating varve chronology is confirmed by two terrestrial radiocarbon dates, whereby aquatic radiocarbon dates reveal decreasing reservoir ages up core. Changes in seasonal deposition characteristics are attributed to changes in runoff and precipitation and/or to evaporative summer conditions.

The dating of carbonates by laser ablation inductively coupled plasma mass spectrometry is improved by an additional, newly characterised reference material and adapted data evaluation protocols: the shape (diameter to depth) of the ablation crater has to be as similar as possible in the reference material used and the unknown samples to avoid an offset. Different carbonates have different ablation rates per laser pulse. With robust uncertainty propagation, precision can be as good as 2–3 %.

Geologic dating methods generally do not directly measure ages. Instead, interpreting a geochemical measurement as an age requires a middle layer of calculations and supporting data, and the fact that this layer continually improves is an obstacle to synoptic analysis of geochronological data. This paper describes a prototype data management and analysis system that addresses this obstacle by making the middle-layer calculations transparent and dynamic to the user.

The generation of highly precise and accurate ages requires crushing of the original sample so that individual mineral grains may be separated out for dating. Here, we use a focused ion beam to extract grains directly from a subset of a sample, effectively performing microsurgery to isolate individual crystals from the rock itself. This approach opens the door to high-precision dating for a variety of precious planetary materials that have previously been challenging to date.

Baddeleyite is commonly used for U–Pb dating, but textural complexities, alteration features and discordance often make age interpretation difficult. Based on this case study, we discuss strategies for obtaining more accurate baddeleyite ages by high-precision and high spatial resolution methods, including analytical challenges and discordance interpretation. An evaluation of microtextures allows us to distinguish among seven different types of baddeleyite–zircon intergrowths.

The integration of zircon geochemistry and U–Pb geochronology (petrochronology) allows us to improve our understanding of magmatic processes. Here we could reconstruct the ~300 kyr evolution of the magma reservoir that sourced the magmas, fluids and metals to form the Batu Hijau porphyry Cu–Au deposit. The application of in situ LA-ICP-MS and high-precision CA–ID–TIMS geochronology to the same zircons further allowed an assessment of the strengths and limitations of the different techniques.

We show results from a new type of ion detector technology for mass spectrometry that allows us to measure ion beams more precisely. This technology expands the range of ages we can measure using a single instrument and makes it possible to measure those ages – including all required corrections and adjustments – with more confidence. We show measurements of widely used standard materials for Ar / Ar, including air and synthetic standard gas, to illustrate the capabilities of the new detectors.

We investigate the timing and rate of retreat for three alpine glaciers in the southern Rocky Mountains to test whether they followed the pattern of global climate change or were majorly influenced by regional forcing mechanisms. We find that the latter is most likely for these glaciers. Our conclusions are based on a new ¹⁰Be chronology of alpine glacier retreat. We quantify retreat rates for each valley using the BACON program in R, which may be of interest for the audience of Geochronology.

U–Pb ages of zircon crystals are used to determine the provenance and depositional age of strata of the Triassic Chinle and Moenkopi formations and the Permian Coconino Sandstone of northern Arizona. Primary source regions include the Ouachita orogen, local Precambrian basement rocks, and Permian–Triassic magmatic arcs to the south and west. Ages from fine-grained strata provide reliable depositional ages, whereas ages from sandstones are compromised by zircon grains recycled from older strata.

Using a relatively new dating technique, in situ Rb–Sr geochronology, we constrain the ages of two generations of mineral assemblages from the Tropicana Zone, Western Australia. The first, dated at ca. 2535 Ma, is associated with exhumation of an Archean craton margin and gold mineralization. The second, dated at ca. 1210 Ma, has not been previously documented in the Tropicana Zone. It is probably associated with Stage II of the Albany–Fraser Orogeny and additional gold mineralization.

Luminescence properties of samples from the Rinikerfeld, northern Switzerland, are assessed. Reader-specific low preheat temperatures are invesigated to ensure suitable measurement conditions. While quartz is found to be dominated by stable fast components, signal loss is observed for feldspar and polymineral. In general, the ages of the fading corrected feldspar and the fine-grained polymineral fractions are in agreement with coarse-grained quartz, and ages indicate sedimentation during MIS6.

The standard approach to isochron calculation assumes that the distribution of uncertainties on the data arising from isotopic analysis is strictly Gaussian. This excludes datasets that have more scatter, even though many appear to have age significance. Our new approach requires only that the central part of the uncertainty distribution of the data defines a "spine" in the trend of the data. A robust statistics approach is used to locate the spine, and an implementation in Python is given.

This paper serves as a guide to those interested in dating calcite by laser ablation. Within it are theoretical and practical limits of U and Pb concentrations (and U / Pb ratios), which would allow viable extraction of ages from calcite (and other minerals with moderate U / Pb ratios), and which type of instrumentation would be appropriate for any given sample. The method described uses a new detector array, allowing for lower detection limits and thereby expanding the range of viable samples.

⁴⁰K is an isotope of potassium that undergoes several different modes of radioactive decay. We use the decay of ⁴⁰K to determine the ages of geologic materials that contain potassium but doing this requires us to know the rate at which ⁴⁰K decays by its different decay modes. Here, we investigate one decay mode of ⁴⁰K that has previously been overlooked. We demonstrate that this decay mode exists, estimate its rate, and evaluate its significance for geochronology.

Orakei Basin – a former maar lake in Auckland, New Zealand – provides an outstanding sediment record over the last ca. 130 000 years, but an age model is required to allow the reconstruction of climate change and volcanic eruptions contained in the sequence. To construct a relationship between depth in the sediment core and age of deposition, we combined tephrochronology, radiocarbon dating, luminescence dating, and the relative intensity of the paleomagnetic field in a Bayesian age–depth model.

Meteoric beryllium-10 concentrations in soil profiles have great capacity to quantify Earth surface processes, such as erosion rates and landform ages. However, determining these requires an accurate estimate of the delivery rate of this isotope to local sites. Here, we present a new method to constrain the long-term delivery rate to an eroding western US site, compare it against existing delivery rate estimates (revealing considerable disagreement between methods), and suggest best practices.

Cassiterite is the primary tin ore mineral and is associated with other elements needed for green technology. The mineral is deposited from hydrothermal fluids released from magmas. Because it is extremely acid resistant, there has been difficulty dissolving the mineral for isotopic analysis. To improve the understanding of the timing and models of formation processes, we use a novel method to dissolve and extract radiogenic isotopes of the uranium-to-lead decay scheme from cassiterite.